
Note: Product images are for representation and may not match the exact item. 1212 Diesel Performance is not responsible for typographical, image, pricing, or listing errors.
S&S Diesel Motorsport · Part # 6.7F-DCR-1
Eliminate CP4 Failure for Good on Your 2011–2026 6.7L Powerstroke
Replace your factory Bosch CP4.2 time bomb with S&S Diesel Motorsport's plug-and-play Stanadyne DCR 2-piston eccentric-drive pump conversion. Zero ECU tuning required, 50-state CARB-compliant (EO# D-756-6), and engineered to fit cleanly under the factory intake manifold.
- Patented Stanadyne DCR 2-Piston Eccentric Drive: Replaces fragile CP4 roller tappets with pressure-lubricated bushings that cannot rotate or send metal debris through your fuel system.
- True Plug-and-Play Fitment: Fits cleanly under the factory 6.7L intake manifold with OE-style fuel lines (Updated 2025 line set) and requires no ECU tuning or calibration.
- 50-State Emissions Compliant: CARB Exempt (EO# D-756-6) for all 2011–2026 Ford 6.7L Powerstroke trucks.
The Problem vs. The DCR Solution
Why Factory Bosch CP4.2 Pumps Grenade—And How the S&S DCR Ends It Permanently
The factory Bosch CP4.2 high-pressure fuel pump uses a cam-and-roller tappet architecture that was never engineered for North American ultra-low-sulfur diesel (ULSD) lubricity levels. When an air pocket or fuel lubricity drop causes a roller tappet to skid and rotate 90 degrees against the cam lobe, it grinds metal shrapnel directly into all 8 piezoelectric injectors, fuel rails, lines, and tank—resulting in a $10,000 to $14,000+ cab-off repair bill.
| Engineering Metric | Factory Bosch CP4.2 Pump | S&S Stanadyne DCR Conversion (6.7F-DCR-1) |
|---|---|---|
| Drive Mechanism | Fragile cam & sliding roller tappet buckets; prone to 90° rotation if momentarily starved of lubrication. | Patented 2-piston eccentric drive with non-rotating, pressure-lubricated heavy-duty bushings. |
| Low-Lubricity Fuel Tolerance | Highly vulnerable to US ULSD dry fuel, water contamination, and air intrusion during filter changes. | Engineered specifically to exceed military and commercial low-lubricity and contaminated fuel standards. |
| Catastrophic Contamination Risk | High risk—cam/roller spalling sends fine metallic debris through all 8 injectors, high-pressure rails, and return lines. | Eliminates CP4 roller-spalling failure mode completely, protecting your $4,000+ injector set and fuel system. |
| Fuel Displacement & Output | ~1,000 mm³/rev nominal displacement (struggles to maintain rail pressure under heavy load or larger injectors). | 1,250 mm³/rev displacement (+25% more flow than OEM CP4) and higher output than typical CP3 conversions. |
| ECU Calibration / Tuning | Factory calibration. | Zero ECU calibration required—matches OE volume control curve for seamless plug-and-play operation. |
| Emissions Compliance | Factory equipment. | 50-State CARB Legal (EO# D-756-6) for 2011–2026 Ford 6.7L Powerstroke trucks. |
| Financial Exposure | $10,000–$14,000+ full fuel system replacement when the CP4 grenades (often denied under warranty). | One-time $2,400.00 permanent mechanical fix with Free Shipping and $0 core charge. |
Key Engineering & Installation Benefits
Engineered to Outlast Your Truck—Without Touching Your Tuning
Co-developed by S&S Diesel Motorsport and Stanadyne, the 6.7F-DCR-1 conversion was purpose-built so mechanics and truck owners can replace the CP4.2 without cutting the intake manifold, fighting custom brackets, or flashing the ECM.
No ECU Calibration, Cutting, or Splicing Required
Unlike older conversions that require custom tuning or aftermarket fuel rail pressure regulators, the S&S DCR pump uses an OE-calibrated volume control actuator. Bolt it into the factory valley under the intake manifold, connect the OE-style lines and harness, prime the fuel system, and drive.
CARB Exempt EO# D-756-6 (2011–2026 Super Duty)
Verified and certified by the California Air Resources Board under Executive Order D-756-6. Fully legal for street, commercial hotshot, fleet, and heavy towing use across all 50 US states on 2011–2026 Ford F-250, F-350, F-450, and F-550 6.7L Powerstroke pickups and cab-and-chassis trucks.
25% More Fuel Flow & Quieter Operation
The compact 2-piston eccentric-drive DCR delivers 1,250 mm³/rev—25% more fuel volume than a stock CP4.2 and more than a standard CP3 conversion—while synchronizing pump strokes for smoother rail pressure stability and noticeably quieter engine idle.
Complete Hardware Breakdown · Part # 6.7F-DCR-1
Everything Included in the Box (Updated 2025 Line Package)
S&S Diesel Motorsport's latest 2025 update includes revised corrosion-resistant high-pressure fuel lines and OE-style quick-connects for a clean, factory-grade installation.
- Brand-New S&S / Stanadyne DCR High-Pressure Fuel Pump: 100% new 2-piston eccentric-drive pump—completely replaces the factory Bosch CP4.2 with zero core charge.
- Updated 2025 OE-Fit High-Pressure & Low-Pressure Fuel Lines: Pre-bent, corrosion-resistant steel high-pressure feed lines and OE-style quick-connect low-pressure supply/return lines engineered for exact factory routing.
- Billet / Cast Mounting Plate & Bracketry: Precision-machined mounting plate and bracket assembly that bolts directly into the factory 6.7L valley under the intake manifold.
- Plug-and-Play FCA Pig-Tail Harness & Complete Hardware Kit: Includes the fuel control actuator (FCA) wiring adapter harness, gaskets, o-rings, and installation fasteners—no bypass return filter head is needed because the CP4 pump is completely removed.

Vehicle Fitment & Technical Specifications
Verified Fitment for 2011–2026 Ford 6.7L Powerstroke Trucks
One unified part number (6.7F-DCR-1) covers all 2011–2026 Ford Super Duty 6.7L Powerstroke diesel applications. Verify your truck generation and specifications below.
| Model Years | Chassis / Platform | Fitment & Emissions Notes |
|---|---|---|
| 2011–2016 Gen 1 6.7L |
Ford F-250, F-350, F-450, F-550 Super Duty (Pickup & Cab/Chassis) | Direct CP4.2 replacement under factory intake manifold. No tuning required. CARB EO# D-756-6. |
| 2017–2019 Gen 2 6.7L |
Ford F-250, F-350, F-450, F-550 Super Duty (Alu-Body) | Direct bolt-on with Updated 2025 high-pressure & low-pressure fuel lines, mounting plate, and FCA adapter harness. CARB EO# D-756-6. |
| 2020–2026 Gen 3 6.7L / HO |
Ford F-250, F-350, F-450, F-550 Super Duty (Standard & High Output) | Full compatibility with 2020–2026 6.7L Powerstroke fuel systems. Plug-and-play ECU control. CARB EO# D-756-6. |
S&S Diesel Motorsport 6.7F-DCR-1 Specifications
Companion Maintenance & Alternative Options
Complete Your 6.7L Fuel System Protection
Completing your 6.7L Powerstroke fuel system service? Pair your DCR conversion with S&S Diesel Motorsport's Fuel Leak Prevention Kits (LPK Plus) to eliminate fragile factory plastic under-hood fuel filter housings, or explore the Gen2.1 Disaster Prevention Bypass Kit if you are keeping your stock CP4 pump.
SKU: CP4-6.7F-BP-G2.1
Gen2.1 Ford 6.7L CP4 Disaster Prevention Kit with Return Filter Assembly (2011-2026)$400.00
Ships FreeSKU: 6.7F11-LPK-PLUS
Ford 6.7L Fuel Leak Prevention Kit Plus (2011-2016)$350.00
$10 Flat ShipSKU: 6.7F17-LPK-PLUS
Ford 6.7L Fuel Leak Prevention Kit Plus (2017-2026)$367.00
$10 Flat ShipSKU: 6.7F11-LPK-FK
Ford 6.7L Replacement LPK Fuel Filter Kit (2011-2016)$77.00
$10 Flat ShipSKU: 6.7F17-LPK-FK
Ford 6.7L Replacement LPK Fuel Filter Kit (2017-2026)$94.00
$10 Flat ShipBuyer FAQ
Frequently Asked Questions: Ford 6.7L CP4 to DCR Conversion
Direct answers to the most common questions from 6.7L Powerstroke owners and diesel technicians before upgrading from the factory CP4.2 to the S&S DCR pump.
Do I need a tune or custom ECU calibration to run the S&S DCR conversion pump?
Will this kit fit my year 6.7L Powerstroke (2011–2026)?
How does the DCR conversion compare to a CP3 conversion or a CP4 Disaster Prevention Kit?
Is there a core charge or do I need to return my old CP4 pump?
How much is shipping, and is the Updated 2025 Line Kit in stock?
In Stock · Part # 6.7F-DCR-1 · Free Ground Shipping Included
Ready to Protect Your 2011–2026 6.7L Powerstroke Fuel System?
Order the complete S&S Diesel Motorsport CP4 to DCR Pump Conversion for $2,400.00 with Free Shipping and zero core charge.




